Madallussarja Suzuki Hayabusa 1999-> Portaattomasti Säädettävä- Brock's Performance

229,90€

Tuotekoodi: 240265

Jaa:

TILAUSTUOTE, TOIMITUSAIKA NOIN 2 VIIKKO(A)

Please read and follow all instructions BEFORE installing links. Failure to do so could result in a dangerous situation.

1. Innovative ‘window’ allows remaining thread engagement to be visually inspected. Unlike other fully-adjustable links on the market (which leave you guessing how many threads are left holding the sections together), if you can’t see the threads in our windows, you may not have enough thread strength. This simple idea can prevent a potentially hazardous situation which could occur if the ends pulled out during the launch or down track.

2. Direct replacement using stock hardware, etc… (Lower rear cowling/belly pan removal or modification NOT required.) Stock lengths duplicate our 3 hole adjustable links from position #TWO to an equal distance beyond position #THREE. This allows use in most lowered stock and extended swingarm applications.

3. Light weight/exceptionally strong design derived utilizing stress analysis software. (Busa link set weighs 9 oz. total. ZX-14 Links set weighs 14 oz. total.)

4. Laser etched “L” /Arrow shows direction to turn wrench to lower bike. Remember L = LOWER. (Links adjust LONGER to make the bike LOWER. Opposite direction to raise bike.)

5. Allows rear ride height adjustments without removing links from bike. Use stock links (and/or calipers) as a guide with equal threads showing in each window, and then count the same number of flats on the adjustment rods on each link to adjust ride height. Use the window as a final inspection.

Note: Due to natural thread timing issues, not all windows will have the exact same amount of link showing in the window. Basically, if you can see threads in the window, then all is fine. If threads are NOT showing in all adjustment windows, then DO NOT OPERATE the BIKE!

6. Corrosion-free stainless steel adjustment rods and hardware. Follow your make/model service manual for torque specification on all original equipment fasteners. Standard ½ inch (or 13mm) open end wrench required for shaft (height) adjustment. 5/8 inch (or 16mm) open end wrench required for lock nut adjustment.

Also note: The L/Arrow also shows the direction to LOOSEN the lock nuts. After ride height adjustment, snug each lock nut (in the opposite direction of the L/Arrow) to prevent movement during operation of the bike. DO NOT OPERATE the motorcycle with the lock nuts loose! A drop of Loctite® Threadlocker Blue should be used on all threads as an added safety measure.

7. Black anodized CNC machined billet aluminum ends designed to match the performance and look of today’s sportbikes.

Merkki	Malli	Vuosimallit
Suzuki	Hayabusa GSX 1300 R	1999 - 2022

Kirjoita tuotearvostelu tästä tuotteesta!

Valmistajat

Myydyimmät